Foad Sanat Sepahan Engineering
Pneumatic vibrators
Vibration is transmitted through the mounting point to help release material or improve its movement. The vibration mechanism and operating cycle are matched to the vessel and material.
A pneumatic vibrator creates repeated vibration rather than the separate impacts of a pneumatic hammer. Vibration can affect the structure, nearby equipment and weighing stability, so the mounting and operating sequence are reviewed as part of the installation.
Technical selection
| Material problem | Poor discharge, wall adhesion or irregular feed; include moisture, size and flow behaviour. |
|---|---|
| Vessel | Wall material and thickness, geometry, mounting reinforcement and nearby equipment. |
| Compressed air | Available pressure, flow, air quality, hose, valve and control arrangement. |
| Operating cycle | Continuous or intermittent use, duration and coordination with discharge or weighing. |
Installation & maintenance
- Mount on the specified support and inspect fasteners and the surrounding structure.
- Use the air preparation and lubrication required for the selected mechanism.
- Review noise, air consumption and the material response when setting the operating cycle.
Request a technical review
Send the application, operating conditions, dimensions and available drawings or photographs. State any information that is still unknown so the technical review can address it.