Wedge wire water well screens
Continuous-slot screens for water entry into a well while retaining the selected formation or filter-pack particles. Screen selection belongs to the complete well design, including the aquifer, gravel pack, installation and development method.

Operating principle and configuration
Water moves from the water-bearing formation, through any specified gravel pack and across the slotted screen into the well. Wire and supports form the screening surface; end connections join the screen sections to the well string.
Slot selection must follow formation grading and, where used, filter-pack grading. A smaller slot is not automatically a better design: active length, usable open area, hydraulic demand, clogging and well-development conditions must be considered together. One fixed slot is not appropriate for every formation.
Main technical specifications for selection
| Formation and completion | Bore log, grading of the water-bearing layers, screened intervals and whether a gravel or filter pack is used. |
|---|---|
| Filter pack | Pack grading, placement arrangement and compatibility with the formation and proposed slot; provide the well designer’s requirements. |
| Screen dimensions | Outside and inside diameter, section length, total screened length, blank zones and casing dimensions. |
| Slot and structure | Nominal slot and tolerance, wire and support profiles and usable screening area, with the intended water-entry direction. |
| Pumping duty | Required normal and maximum abstraction, operating water levels and the arrangement of active screen intervals. |
| Mechanical conditions | Installation depth, external loading, string weight and installation, development and rehabilitation loads specified for the project. |
| Connections and material | Joint type and dimensions, end fittings, water chemistry, temperature, corrosion or scaling conditions and planned treatment chemicals. |
| Supply and inspection | Section identification, quantity, drawing approval, agreed checks of slots, dimensions, welds, end connections and material identification. |
Technical arrangement
Installation, inspection and cleaning
- Check section identity, connections and cleanliness before lowering the screen. Follow the approved installation and support plan.
- Keep handling loads within the agreed duty and protect the slot surface and end fittings from damage.
- Use a development or rehabilitation method compatible with the screen, joints and well construction.
- Record pumping rate, water level and sand production under comparable conditions. Changes can arise from deposits, formation behaviour or damage and require investigation before selecting a remedy.
Related filter equipment
Request a technical review
Provide the bore log and formation grading, filter-pack data, screen interval and depth, diameters and section lengths, pumping duty, connection requirements, water chemistry and the installation and development conditions.