Wedge wire screens in food and agricultural processing
Screens for incoming-water protection, washing-stream separation and product drainage or recovery. Irrigation-water service and direct food contact have different material, surface and cleaning requirements.

Process duties and selection approach
Curved screens, panels and drum surfaces can separate solids from a washing or process stream, or recover useful material while allowing liquid to pass. Define which fraction should remain and which should pass, then assess both product recovery and the quality of the liquid outlet.
Soft particles, fibres and deformable material do not behave like rigid grains. Shape, orientation, viscosity, solids loading and feed distribution can change passage through a slot. Trial data or a representative sample may be needed before changing the opening. Screen selection also includes the product-contact surface and cleaning arrangement.
Technical information for the application
| Product and duty | Product, accompanying liquid and process stage; distinguish irrigation or utility water from direct product-contact service. |
|---|---|
| Separation target | Required retained and passing fractions, solids recovery, outlet quality and permitted product damage. |
| Feed characteristics | Particle size and shape, fibres, softness, adhesion, solids concentration and viscosity at process temperature. |
| Operating range | Normal and peak flow, feed variation, temperature, operating hours and available head or pressure drop. |
| Screen form and slot | Panel, curved or drum surface; opening and tolerance, active area, feed direction and mounting. |
| Contact materials and finish | Agreed alloy, joints, seals, surface requirements, accessible crevices and required project documentation. |
| Cleaning regime | Chemicals, temperature, method, frequency, drainability and access for inspection or removal. |
| Installation and scope | Feed distribution, liquid collection, solids discharge, host drawing and a defined screen component or complete unit. |
Technical arrangement

Equipment photographs
Installation, inspection and cleaning
- Inspect product-contact surfaces, joints and removable seals using the plant’s cleaning and inspection procedure.
- Verify feed distribution and ensure retained material can leave without unwanted accumulation or excessive product damage.
- Monitor slot plugging, wear and changes to solids recovery or liquid quality. Review both outlet streams when adjusting the process.
- Check compatibility before changing cleaners or cleaning temperature. A stainless alloy alone does not establish the hygiene suitability of the complete assembly.
Relevant filter equipment
Request a technical review
Send the product and liquid description, particle and fibre data, flow and temperature, required retained and passing fractions, cleaning chemicals and a drawing or photos of the installation. State any direct-food-contact and surface requirements.

