Wedge wire screens for mining and mineral processing
Screens for classification, slurry dewatering and liquid–solid separation. Feed grading, solids concentration, abrasion and the machine mounting determine the screen configuration.

Process duties and selection approach
Flat panels, curved sieve bends and centrifuge baskets perform different duties. A panel is matched to its deck and supports; a sieve bend requires the correct curvature and feed arrangement; a basket must match the rotating assembly and its connections. The required product size or residual moisture defines the process target.
Nominal slot width alone does not define separation performance. Particle shape, near-size material, feed distribution and moisture can change passage through the screen or cause blinding. Review operating results or a representative sample alongside the proposed opening and available screening area.
Technical information for the application
| Mineral and wear | Identify the mineral, particle shape, abrasive components and any impact at the feed point. |
|---|---|
| Feed grading | Provide particle-size distribution and the size fractions to pass and retain. |
| Slurry and throughput | State normal and peak feed, solids concentration, liquid composition and temperature. |
| Required output | Specify the classification target, solids recovery or required discharge moisture and the current operating problem. |
| Slots and profiles | Specify nominal opening, tolerance, slot orientation and profile arrangement with the machine drawing. |
| Panel and supports | Give overall dimensions, frame details, unsupported spans, hold-downs and the direction of material travel. |
| Curved or rotating parts | For sieve bends give radius and feed layout; for baskets give the mating dimensions and the machine’s alignment and balancing requirements. |
| Supply and acceptance | Identify a bare screen, framed part or complete assembly; agree dimensional, slot, weld and material inspection before manufacture. |
Technical arrangement

Equipment photographs
Installation, inspection and cleaning
- Check support contact and secure every fixing before returning the machine to service.
- Keep the feed distributed across the intended screening width; investigate local impact and uneven wear.
- Record blinding, enlarged slots, broken welds and changes in discharge moisture during inspection.
- For replacement centrifuge baskets, follow the machine procedure for installation, clearance and balance verification.
Relevant filter equipment
Request a technical review
Send the feed grading, mineral and slurry data, throughput, target separation or moisture, machine model, mounting drawing and photographs of the existing screen and wear pattern.

