Wedge wire screens for pulp and paper processes
Screening for fibre recovery, process-water solids separation and dewatering. Fibre characteristics, feed consistency and the required quality of both outlet streams guide the selection.

Process duties and selection approach
Define whether the screen must recover useful fibres, remove coarse solids, protect downstream equipment or reduce water carried with the solids. Curved screens, separator elements and rotary drums are different arrangements; match the component to the process stage and the existing machine.
Flexible fibres behave differently from granular particles. Fibre length, floc formation and feed consistency affect passage and the layer forming on the screen. Slot width, feed presentation and cleaning are reviewed together. A new opening size alone cannot establish fibre recovery or outlet-water quality.
Technical information for the application
| Process duty | Identify the stream, target separation and whether the retained solids or passing liquid is the useful product. |
|---|---|
| Fibre and contaminants | Describe fibre type and length, feed consistency, fillers, coarse solids and other contaminants. |
| Flow and outlet target | Give normal and peak flow and the required solids content or quality of each outlet stream. |
| Chemistry and temperature | Provide operating temperature, water composition and process or cleaning chemicals for material selection. |
| Slot and screening area | Specify proposed opening and tolerance, profile direction and available active area; include current performance or sample data. |
| Machine geometry | Supply drum diameter and length or panel dimensions, mating connections, supports and flow direction. |
| Cleaning arrangement | Define spray or wash provision, permitted cleaning conditions, discharge route and maintenance access. |
| Supply boundary | Distinguish a replacement screen element from a framed assembly or a complete machine with drive, housing and washing equipment. |
Technical arrangement

Equipment photographs
Installation, inspection and cleaning
- Inspect fibre accumulation and scale before changing the slot specification; identify the cause of reduced throughput.
- Check feed distribution and keep the solids discharge and wash arrangement clear.
- Confirm chemical compatibility and permitted cleaning conditions before using a new cleaning product.
- For a replacement drum, verify fit, rotation clearance and supports against the machine drawing before installation.
Relevant filter equipment
Request a technical review
Send the process stage, fibre and contaminant data, feed consistency, flow and temperature, required outlet quality, cleaning method and a drawing or photographs of the existing assembly.

